FloorsHQ

Sealers for various floor types

STONESHIELD manufactures sealers for terracotta, slate, slasto, sandstone, marble, granite, travertine, terrazzo, cement tiles, cement pavers, oxided cement floors, natural stone and quarry tiles. High gloss sealers, low sheen sealers, matt sealers, colour enhancing sealers, natural look sealers, resin based sealers, water based acrylic sealers, epoxy and urethane sealers are all available, including penetrating repellents and invisible sealers.

CEMENT SEALER

CEMENT SEALER

Stoneshield Cement Sealer is a premium quality, non-yellowing, penetrating, solvent-based resin sealer that provides superior stain and surface protection. Colour enhancing satin "wet look" finish.

USES:

Suitable on natural and oxided cement floors, imprint paving, cement tiles, pavers and cobbles. Also suitable for low traffic and domestic concrete floors. For interior and exterior use.

Code:Description:Size:
800/04/035CEMENT SEALER1L
800/04/042CEMENT SEALER5L
GROUT SEALER

GROUT SEALER

Stoneshield Grout Sealer is an easy to use one-step penetrating aerosol sealer especially formulated for grout. A no-sheen, no surface film, natural look finish. Leaves no hard to remove surface residue and prevents mould and mildew growth.

USES:

Suitable for use on all grout joints between ceramic, porcelain and natural stone tiles. For use on wall and floor grout. For interior and exterior use.

Code:Description:Units:
800/04/080GROUT SEALER400ml
QUARRI-SEAL

QUARRI-SEAL

Stoneshield Quarri-Seal is a premium quality, non-yellowing solvent-based resin sealer that provides a satin finish, superior stain resistance and surface protection. A penetrating sealer that colour enhances and provides a

USES:

Suitable on low, medium and high porosity tiles including terracotta, slate, slasto, sandstone, cement tiles and pavers, oxided cement floors, terrazzo, natural stone and quarry tiles. Interior and exterior use.

Code:Description:Units:
800/03/067QUARRI SEAL1 Liters
800/03/074QUARRI SEAL5 Liters
800/03/075QUARRI SEAL25 Liters
QUARRI-SEAL MATT

QUARRI-SEAL MATT

Stoneshield Quarri-Seal Matt is a premium quality, non-yellowing solvent-based resin sealer that provides a satin finish, superior stain resistance and surface protection. A penetrating sealer that colour enhances.

USES:

Suitable on low to medium porosity tiles, including terracotta, slate, sandstone, cement tiles and pavers, oxided cement floors, terrazzo, natural stone and quarry tiles. Interior and exterior use.

Code:Description:Units:
800/03/012QUARRI SEAL MATT1 Liters
800/03/029QUARRI SEAL MATT5 Liters
800/03/030QUARRI SEAL MATT25 Liters
H2O SEAL & SHINE

H2O SEAL & SHINE

Stoneshield H2O Seal & Shine is a superior quality natural look, non-yellowing water-based resin sealer that provides a protective surface shine, good stain resistance and ease of cleaning. Seals and shines in one step.

USES:

Suitable on limestone, sandstone, slate, quartzite, cement tiles, terracotta, terrazzo and oxided concrete. For interior and exterior use.

Code:Description:Units:
800/04/097H2O SEAL AND SHINE1 Liters
800/05/003H2O SEAL AND SHINE5 Liters
800/05/004H2O SEAL AND SHINE25 Liters
PROTECTA PLUS

PROTECTA PLUS

Stoneshield Protecta-Plus is a premium quality, non-yellowing, penetrating, solvent-based twin pack polyurethane sealer. Provides excellent stain and surface protection. Colour enhances and provides a satin sheen finish.

USES:

Suitable on low to medium porosity tiles including slate, low to medium porosity terracotta, unglazed ceramics and quartzite; honed, natural and tumbled marble and travertine; flamed granite and split tiles. Interior use only.

Code:Description:Units:
800/06/071PROTECTA PLUS1 Liters
800/06/088PROTECTA PLUS5 Liters
SANDSTONE SEALER

SANDSTONE SEALER

Stoneshield Sandstone Sealer is a superior quality natural look, non-yellowing water-based resin sealer that provides a protective surface sheen, good stain resistance and ease of cleaning.

USES:

Suitable on natural, tumbled and honed sandstone, limestone and similar natural stone. Interior and exterior use.

Code:Description:Units:
800/00/005SANDSTONE SEALER1 Liters
800/00/015SANDSTONE SEALER5 Liters
HOME & DRY - BRICK & MASONRY REPELLENT

HOME & DRY - BRICK & MASONRY REPELLENT

Stoneshield Home & Dry masonry & brick water repellent is a superior quality natural look, no sheen, no surface film, solvent-based penetrating water repellent, designed to provide protection against rain, moisture, general airborne dirt, pollution, mould

USES:

Suitable on clay and cement bricks and blocks, fiber cement; concrete and masonry surfaces; natural and artificial stone. Can also be used as a primer for silicone and emulsion paints and resin plasters. Suitable for interior and exterior use.

Code:Description:Units:
800/08/062HOME & DRY BRICK & MASONRY REPELLENT1 Liters
800/05/072HOME & DRY BRICK & MASONRY REPELLENT5 Liters
MARBLE, GRANITE & TRAVERTINE SEALER

MARBLE, GRANITE & TRAVERTINE SEALER

Stoneshield Marble, Granite & Travertine Sealer is a premium quality solvent-based penetrating, no-sheen, no surface film, natural look water and oil repellent for maximum stain protection. Allows water vapour transmission.

USES:

Can be used as a pre-grouting sealer on clean surfaces at least 6 hours before grouting. Suitable on low porosity tiles including polished, honed, tumbled and natural marble, travertine, granite, limestone and other natural stone. Interior and exterior use.

Code:Description:Units:
800/02/051MARBLE, GRANITE & TRAVERTINE SEALER1 Liters
800/02/068MARBLE, GRANITE & TRAVERTINE SEALER5 Liters
PENETRATING SEALER COLOUR ENHANCER

PENETRATING SEALER COLOUR ENHANCER

Stoneshield Penetrating-Sealer Colour-Enhancer is a premium quality solvent-based penetrating, no-sheen, no surface film, colour enhancing water and oil repellent for maximum stain protection. Allows water vapour transmission.

USES:

Can be used as a pre-grouting sealer on clean surfaces at least 6 hours before grouting. Suitable on unpolished, tumbled, flamed, natural and honed natural stone tiles including marble, travertine, granite, limestone, sandstone, quartzite; cement pavers and tiles, masonry surfaces, low porosity terracotta and quarry tiles. For interior and exterior use.

Code:Description:Units:
800/02/099PENETRATING SEALER COLOUR ENHANCER1 Liters
800/03/005PENETRATING SEALER COLOUR ENHANCER5 Liters
PENETRATING SEALER - NATURAL LOOK

PENETRATING SEALER - NATURAL LOOK

Stoneshield Penetrating-Sealer Natural-Look is an economical solvent-based, penetrating, natural look, no-sheen, no surface-film, water repellent for general stain protection. Allows water vapour transmission.

USES:

Can be used as a pre-sealer on to clean surfaces at least 6 hours before grouting. Suitable on low porosity natural stone tiles including marble, travertine, granite, porcelain, limestone, quartzite, cement pavers, masonry surfaces, low porosity terracotta, quarry tiles, vetrified and unglazed ceramics. For interior and exterior use.

Code:Description:Units:
800/00/022PENETRATING SEALER - NATURAL LOOK1 Liters
800/00/040PENETRATING SEALER - NATURAL LOOK5 Liters
PORCELAIN TILE SEALER

PORCELAIN TILE SEALER

Stoneshield Porcelain -Tile Sealer is an economical solvent-based, penetrating, natural look, no-sheen, no surface film, water repellent for general stain protection. Allows water vapour transmission.

USES:

Can be used as a pre-sealer on to clean surfaces at least 6 hours before grouting. Suitable on polished and unpolished porcelain, vitrified and unglazed ceramics and other low porosity polished natural stone and it is also suitable as a grout sealer. For interior and exterior use.

Code:Description:Units:
800/03/036PORCELAIN TILE SEALER1 Liters
800/03/043PORCELAIN TILE SEALER5 Liters
WALL CLADDING SEALER

WALL CLADDING SEALER

Stoneshield Wall-Cladding Sealer is a superior quality natural look, no sheen, no surface film, solvent-based penetrating water repellent, designed to provide protection against rain, moisture, general airborne dirt, pollution, mould and mildew. Allows water vapour transmission.

USES:

Suitable on most natural stone such as marble, granite, sandstone, cast stone, porcelain, terracotta, clay, cement and concrete bricks and blocks and masonry surfaces. Can also be used as a primer for silicone paints, emulsion paints and resin plasters. For interior and exterior use.

Code:Description:Units:
800/02/075WALL CLADDING SEALER1 Liters
800/02/082WALL CLADDING SEALER5 Liters
NON SKID ADDITIVE

NON SKID ADDITIVE

  • Supplied in powder form to be added to a sealer prior to application.
  • Unit size supplied for a 5 litre unit of sealer.

USES:

  • To provide a light non-skid finish to surfaces that require sealing.
  • Must be added to a Stoneshield sealer prior to application.
  • Works best with solvent based resin sealers.
Code:Description:Weight:Units:
800/03/031NON SKID ADDITIVE1135 gr1
 
Tel no: 011 444 1222
Email: info@stoneshield.co.za
Fax no: 011 444 6666
Floors HQ Logo
40 Fifteenth street, Marlboro North,
Sandton,
Johannesburg, South Africa.