FloorsHQ

Skeg levellers for applying self levelling epoxy

FloorsHQ manufactures and distributes the ROX range of Skeg levellers for the installation of self-levelling epoxy and urethane systems to the correct thickness. A very accurate and easy to use tool for thin to medium thickness systems. Made from high quality stainless steel.

SKEG LEVELER (PIN LEVELER REPLACEMENT)

SKEG LEVELER (PIN LEVELER REPLACEMENT)

  • Manufactured from stainless steel with 4 pre-set skegs.
  • Very precise and accurate tool for medium thickness systems.
  • Replaceable skegs from 3 mm up to 10 mm.
  • Due to the design the skegs last longer and wear slower than pins.
  • Replaceable skegs make this tool very economical.

USES:

  • For applying self smoothing and self leveling systems.
  • Use for self levelling epoxy, urethane & cement screeds from 3 to 10 mm.
Code:Description:Size:Units:
31/5/010SKEG LEVELER600mm1
31/5/013REPLACEMENT SKEGS3mmSet of 4
31/5/014REPLACEMENT SKEGS4mmSet of 4
31/5/016REPLACEMENT SKEGS6mmSet of 4
31/5/018REPLACEMENT SKEGS8mmSet of 4
31/5/020REPLACEMENT SKEGS10mmSet of 4
 
Tel no: 011 444 1222
Email: info@stoneshield.co.za
Fax no: 011 444 6666
Floors HQ Logo
40 Fifteenth street, Marlboro North,
Sandton,
Johannesburg, South Africa.